Where To Place Carbon Monoxide Detectors In Your Lake Havasu House
Residents must protect against a variety of risks like burglary, fire, and flooding. But what about something that can’t be perceived by human senses? Carbon monoxide is different from other threats because you might never know it’s there. Despite that, using CO detectors can effectively protect your family and property. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Lake Havasu property.
What Is Carbon Monoxide?
Referred to as the silent killer as of a result of its lack of odor, color, and taste, carbon monoxide is a common gas produced by incomplete fuel combustion. Any appliance that utilizes fuels like a fireplace or furnace can produce carbon monoxide. While you normally won’t have problems, complications can crop up when equipment is not routinely maintained or adequately vented. These missteps may result in a build-up of this dangerous gas in your home. Generators and heating appliances are commonly to blame for CO poisoning.
When subjected to lower concentrations of CO, you may experience dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to elevated amounts could cause cardiopulmonary arrest, and potentially death.
Suggestions On Where To Place Lake Havasu Carbon Monoxide Detectors
If you don’t use at least one carbon monoxide detector in your interior, buy one today. Ideally, you ought to have one on each floor of your home, including basements. Here are a few tips on where to place carbon monoxide detectors in Lake Havasu:
- Install them on each floor, particularly where you use fuel-burning appliances, like water heaters, furnaces, gas dryers, and fireplaces.
- You should always use one no more than 10 feet away from bedrooms. If you only have one carbon monoxide detector, this is where to put it.
- Position them about 10 to 20 feet away from sources of CO.
- Avoid placing them directly above or next to fuel-burning appliances, as a non-threatening amount of carbon monoxide might be discharged when they kick on and set off a false alarm.
- Attach them to walls at least five feet off the ground so they can sample air where people are breathing it.
- Avoid using them near windows or doors and in dead-air areas.
- Put one in rooms above garages.
Inspect your CO detectors routinely and maintain them per manufacturer guidelines. You will typically have to replace them every five to six years. You should also make sure any fuel-burning appliances are in in optimal working shape and have proper ventilation.